ServicesGutter Covers
Gutter Covers in Sangaree
We install solid gutter covers that shed leaves and pine needles while rainwater follows the curved nose into the trough. Each cover is set to your roof pitch and fastened so the shingles stay untouched. Call and we will measure your home for a free estimate.

What a gutter cover does, and when it is the right choice
A gutter cover is a solid aluminum hood that sits over the open top of the gutter. Rain runs down the roof, wraps around a rounded front edge by surface tension, and drops through a narrow slot into the trough. Leaves, needles and seed pods do not make that turn, so they slide off the edge and fall to the ground.
Covers differ from the mesh and screen products on our Gutter Guards page. Mesh filters water through tiny holes, and long pine needles can spear those holes and mat on top. A solid hood has no holes to plug, which is why it often works better under the pines and oaks common around Sangaree.
The catch is fit. A cover only works when its angle matches the roof, its nose sits the right distance from the gutter lip, and the gutter under it is hung solidly. Those details are what we spend our time on.

What our gutter cover work includes
- 01
Roof pitch and profile check
We measure the pitch of each roof plane before choosing a cover profile. A steep roof sends water fast enough to overshoot a tight nose radius in a heavy storm, so we match the curve to the slope.
- 02
Hanger and fascia inspection
Covers add weight and catch wind. We check every hanger, and replace loose spikes and ferrules with hidden hangers screwed into solid fascia before a cover goes on.
- 03
Shingle-safe mounting
We do not pry up the first course of shingles to slide covers underneath, since that can break the seal strip. Covers attach to the gutter's front lip and back edge at the fascia instead.
- 04
Mitered corners and seams
Inside and outside corners get cut and fitted covers, not gaps left open. Seams overlap in the direction water flows so nothing backs up under a joint.
- 05
Water test before we leave
We run a hose down the roof over each run to watch water wrap the nose and enter the slot. If a section spills over, we adjust it that day.
Questions about Gutter Covers?
Call(843) 595-8808Signs your gutters need covers
Clogs every fall
If your gutters fill with leaves within weeks of being cleared, the trough is open to too much debris. A cover keeps it out at the source.
Pine needles packed in the trough
Needles knit together into a mat that holds water and rots the gutter seams. Solid covers shed them where mesh tends to catch them.
Water spilling behind the gutter
Dark streaks on the fascia or soffit mean water is overflowing toward the house. That wood rots, and covers help by keeping the trough flowing.
Standing water and mosquitoes
Debris dams hold water in the trough for days in summer. Covered gutters drain instead of breeding insects.
Mesh guards that matted over
If an older screen guard is buried under a layer of pollen and needles, a solid hood is a common upgrade.
How a cover installation runs
- 1
Measure and assess
We walk each roof edge, measure linear footage, record the pitch and note any sagging runs or soft fascia. You get a written, line-item estimate that separates covers from any repair work.
- 2
Secure the gutters
Loose hangers are replaced and low spots are re-pitched toward the outlets so water moves once the covers are on. If a run is too far gone, we tell you plainly and point you to our Gutter Repair or Gutter Installation work.
- 3
Fit and fasten the covers
Each section is cut to length, corners are mitered, and covers are screwed to the gutter lip and fascia edge at the angle that matches your roof.
- 4
Test and walk through
We water-test every run, clean up offcuts and screws from the ground and beds, and show you how to rinse the nose edge if pollen builds up.
What sets the price of gutter covers
Cover jobs are priced by the run, but the gutter underneath often matters as much as the cover itself. We look at both before giving you a number, and the estimate lists each part separately so there are no surprise lines later.
- Linear footage and corners
- Longer runs take more material, and every inside or outside corner needs a custom-cut piece.
- Roof height and pitch
- Two-story eaves and steep roofs need more ladder setup and slower, safer work.
- Condition of the gutters and fascia
- Rotten fascia boards or failed hangers must be fixed first, because a cover cannot hold on a weak edge.
- Cover profile and material
- Heavier-gauge aluminum and profiles made for steep roofs cost more than basic hoods, and we explain which your roof actually needs.
Gutter cover questions
Will gutter covers overflow in a heavy summer storm?
A well-fitted cover handles most downpours, but no cover catches every drop in a true cloudburst on a steep roof. We reduce overshoot by matching the nose profile to your pitch and setting the gap to the gutter lip correctly. That is also why we water-test each run before we leave.
Do covers void my shingle warranty?
Some products are designed to slide under the first row of shingles, which can lift them and break the seal. We mount covers to the gutter and fascia instead, so the shingles are not disturbed.
Can covers go on my existing gutters?
Usually, yes, if the gutters are sound and hung firmly. We check every hanger and seam first. If the gutters are sagging or rusted through, we will tell you that covers would not be a good investment on them.
Are covers maintenance-free?
No cover is. Pollen and tree sap can leave a film on the rounded edge that keeps water from wrapping the curve, so a rinse with a hose now and then helps. The trough itself stays far cleaner than an open gutter.
Is the installation covered by a warranty?
Yes. Our cover installations carry a 2-year workmanship warranty. If a cover we fastened comes loose or a seam we joined lets water back up, we come back and correct it.
How do I know you do careful work?
Our company received the Angie's List Super Service Award in 2018. On your job, you will see it in the details: screwed hangers, mitered corners and a water test on every run.
Find out if covers fit your roof
We will measure your pitch, check your gutters and hangers, and tell you honestly whether covers or guards suit your home. It costs nothing to talk it through.